Skip to content

Guide · Servicing and compliance

PUWER Regulations Explained: What They Mean for Your Forklifts

The PUWER regulations say that any equipment used at work must be suitable, safe and well maintained. They also say it must be inspected where needed and used only by trained people. For a business that runs forklifts, PUWER covers the whole truck, not just the bits that lift.

Published 15 November 2026 · Updated 15 November 2026 · 6 min read · By BJB Lift Trucks

Most people meet PUWER when an insurer, an auditor or a customer asks for inspection records. Cue a frantic search through the filing cabinet.

This guide explains what the rules mean in plain English. It covers what they ask of forklift users and how to comply without spending more than you need.

Book a PUWER inspection with your next service

What does PUWER stand for?

PUWER stands for the Provision and Use of Work Equipment Regulations 1998. The Health and Safety Executive (HSE) and local councils enforce them in Great Britain. Northern Ireland has its own, very similar rules.

The HSE publishes an Approved Code of Practice called L22, Safe use of work equipment. For lift trucks there is a separate code, L117. It explains how the training and inspection duties apply to forklifts.

What is PUWER in plain English?

In short, the PUWER meaning comes down to four duties. Your equipment must be:

  • right for the job
  • kept in good repair
  • inspected where it could become dangerous
  • used only by people who know what they are doing

What counts as work equipment?

The definition is very wide. Work equipment means any machine, appliance, tool or installation used at work. In a typical warehouse, factory or yard that includes:

  • counterbalance forklifts, reach trucks and VNA trucks
  • pallet trucks and stackers
  • telehandlers and rough terrain forklifts
  • scissor lifts, cherry pickers and other access platforms
  • floor sweepers and scrubbers
  • battery chargers, ladders and workshop tools

It makes no difference whether you own, hire or lease the kit. If it is provided for use at work, the PUWER regulations apply.

Who has to comply with PUWER?

The main duty falls on employers. It also covers the self employed and anyone in control of work equipment, such as a site manager.

If you hire forklifts, check who arranges servicing and inspections. On our long term and contract forklift hire, we look after servicing and examinations for you.

What are the main PUWER requirements?

The PUWER regulations 1998 are split into numbered regulations. For forklift users, these are the ones that matter most.

Suitable equipment (regulation 4)

Equipment must suit the job and the place it is used. A diesel truck running all day in a food store would be hard to defend. So would a warehouse truck bouncing across a gravel yard.

Maintenance (regulation 5)

Equipment must be kept in good working order and good repair. For a forklift that means planned servicing based on the maker's schedule and the hours it works. If you keep a maintenance log, it must be up to date.

Our guide on why regular forklift servicing matters explains how this saves money as well.

Inspection (regulation 6)

Equipment that could deteriorate and become dangerous must be inspected by a competent person. It must also be checked after anything unusual, such as an accident or a long spell out of use. Results must be recorded and kept until the next inspection.

Information and training (regulations 8 and 9)

Operators and their supervisors need adequate information, instructions and training. For forklifts, L117 says operators must be trained and assessed before using a truck at work.

Mobile work equipment (regulations 25 to 30)

This part covers machines that move, such as forklifts and telehandlers. The rules deal with overturning, crush risks, brakes, the driver's view and lighting. It is why forklifts have seat belts. It is also why operators should actually wear them.

Need operators trained or refreshed? See our RTITB forklift training

How often do you need a PUWER inspection?

Unlike LOLER, PUWER does not set a fixed PUWER inspection frequency. The interval should match the risk. That means how hard the truck works, where it works and how fast faults could develop.

A truck on double shifts in a cold store needs more attention than one used for an hour a day. Working this out is often called a PUWER assessment.

In practice, most businesses have the PUWER inspection done with the LOLER thorough examination. That means at least every 12 months, with routine servicing in between. Operators should also do daily pre use checks.

LOLER and PUWER: how do they fit together?

PUWER covers all work equipment and every part of it. LOLER, the Lifting Operations and Lifting Equipment Regulations 1998, adds extra rules for kit that lifts loads or people.

A forklift falls under both. The mast, chains, forks and hydraulics come under LOLER. The brakes, steering, tyres, lights, horn and seat belt come under PUWER. Our LOLER thorough examination page explains the lifting side.

What does a PUWER inspection of a forklift cover?

A PUWER inspection looks at the parts that keep the operator and everyone nearby safe. On a typical forklift it includes:

  • service brakes and parking brake
  • steering, wheels and tyres
  • the seat and seat belt
  • the overhead guard and load backrest
  • lights, horn, reversing alarms and beacons
  • mirrors and the driver's view
  • controls, gauges and warning lights
  • fuel, LPG or battery systems
  • guards over moving parts

You should receive a written record for each truck. It should show what was checked, any defects and what needs fixing.

Is there such a thing as a PUWER certificate?

Not in the regulations. PUWER says inspection results must be recorded and kept. It does not set out a certificate.

Many inspection firms issue a report or PUWER certificate as a handy record. That is the document your insurer or auditor will usually ask to see.

What happens if you ignore PUWER?

The HSE can issue improvement and prohibition notices. Serious failures can lead to prosecution and fines.

The bigger cost is usually an accident. Worn brakes, bald tyres or a missing seat belt can turn a small bump into a serious injury. If something does go wrong, good records help show you met your duties.

A simple PUWER checklist for forklift users

  • Make sure each truck suits the work and the environment.
  • Stick to a planned servicing schedule and keep the records.
  • Book a PUWER inspection and LOLER examination at least every 12 months.
  • Get operators to do and record daily pre use checks.
  • Take faulty trucks out of use until they are repaired.
  • Train every operator on the type of truck they use.
  • Remember hired kit, cleaning machines and access platforms too.

For the full legal detail, see the HSE guide to PUWER.

PUWER inspections with BJB Lift Trucks

BJB Lift Trucks has worked with businesses across Grimsby, Immingham and Lincolnshire since 1982. Our own engineers carry out PUWER inspections and LOLER examinations on all makes. That covers forklifts, warehouse equipment and access platforms.

We combine inspections with forklift servicing to keep downtime low. We also remind you before the next one is due, which beats remembering it yourself.

Stay on the right side of the PUWER regulations

The PUWER regulations are not there to catch you out. They ask you to pick the right kit, look after it, inspect it and train the people using it.

Get those four right and keep the paperwork. Then the next time an auditor asks, you can hand over the records with a smile.

Before you decide

Questions we get asked

Rest on a question, or tap it, for the answer

PUWER means the Provision and Use of Work Equipment Regulations 1998. They require work equipment to be suitable, maintained, inspected where needed and used only by trained people.

Yes. A forklift is work equipment, so PUWER applies to the whole truck. The lifting parts are also covered by LOLER.

PUWER does not set a fixed interval. It depends on the risk. Most businesses have forklifts inspected under PUWER at least every 12 months, alongside the LOLER examination.

A competent person must carry it out. That means someone with the knowledge and experience to spot defects and judge how serious they are. For forklifts this is usually a qualified forklift engineer.

Yes. PUWER applies to equipment provided for use at work, whether it is owned, hired or leased. Your hire agreement should say who arranges servicing and inspections.

Yes. PUWER requires everyone who uses work equipment to have adequate training. For forklifts that means training and assessment on the type of truck they use.

More guides

Book a PUWER inspection

Our own engineers carry out PUWER inspections and LOLER examinations on all makes, across Grimsby, Immingham and Lincolnshire. Call 01472 230244.

01472 230244

CallEnquire